If You’re Using Bare Wire
1) Unscrew the binding posts on the back of
your speaker by turning counter-clockwise.
2) Insert the bare speaker wire into hole in the
binding post and tighten it securely by turn-
ing clockwise.
If You’re Using Banana Plugs
1) Be sure to follow the instructions on your
banana plugs to attach them to the wire.
2) Screw the binding posts in completely by
turning clockwise.
3) Insert them into the open end of the binding
post.
Note:
As you make your connections, be sure to
connect the positive terminals on your receiver
to the positive terminals on your speakers.
Most two conductor wire has screen printing on
one side to help you differentiate between the
two strands (see image below).
Features
• 1" Audiophile-grade silk-dome tweeter
• 4" Woven fiberglass composite woofer
• HD-X3™ Impedance leveling crossover
technology
• Magnetic shielding
• Furniture-grade finish
• 5-Way gold-plated binding posts
• Anti-Resonant Cabinet
• Acoustically transparent grille
Specifications
Frequency Response: (+/- 3dB) 120-20,000 Hz
(+/- 6dB) 100-22,000 Hz
Nominal Impedance: 8 Ohms
Sensitivity: 84 dB
Recommended Power: 25 - 150 Watts
Driver Configuration: 2-Way
Enclosure: Sealed, 3/4" HDF
Dimensions: 8.75" H x 5.33" W x 5.5" D
Weight: 8 lbs.
Connections
To connect your speaker to your receiver you will
need standard 2 conductor, stranded speaker
wire. For instructions on installation, please read
below.
Preparing the Wire
1) Separate the last 4" of your speaker wire into
two pieces.
2) Strip 1/2" off the shielding off of the end of
each wire (see A below).
3) Twist the exposed copper strands with your
fingers until they are tightly unified. Be sure
there are no “flyaway” strands (see B below).
A
B
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
+
-
+
-
Features, Specifications, and Connections
