Apera PH700, Instruction Manual

Page: 13 / 16

- 11 -
5.6
Parameter Setting
Table-6
Symbol Parameter setting content Parameter Factory default setting
P1 Select pH buffer series USA - NIST USA
P2 Select resolution 0.1/0.01 pH 0.01 pH
P3 Select temperature unit
℃
-
℉ ℃
P4 Clear stored data No-Yes No
P5 Return to factory default No-Yes No
5.6.1 How to do the parameter setting:
In measurement mode, long press to enter parameter setting P1. Then press to change menu
from P1 to P2…P5. For details, please see Table-7.
Table-7 pH Parameter Setting
P1 — Select pH buffer series (USA— NIS)
1. Long press to enter P1.
2. Press , USA flashes, press to select USA or NIS, press to
confirm; USA — USA Series
，
NIS — NIST Series
3. Press to enter P2 or press to return to measurement mode.
P2 — Select resolution (0.01—0.1)
1. Press , 0.01 flashes, press to select 0.01 or 0.1, press
to confirm;
2. Press to enter P3 or press to return to measurement mode.
P3 — Select temperature unit (°C—°F)
1. Press , °C
flashes, press to select °C or °F, press
to confirm;
2. Press to enter P4 or press to return to measurement mode.
P4 — Clear stored data (No—Yes)
1. Press , “No” flashes, press to select No or Yes, press
to confirm;
2. Press to enter P5 or press to return to measurement mode.