- 14 -
P1.4. – Set pH measurement of pure water (Off – On)
1. Press key,
Off
flashes, then press
key,
On
flashes, when
parameter flashes, press key to confirm.
Off
–turn off temperature
compensation,
On
– turn on temperature compensation.
2. After confirm parameter, press
key to enter in P1.5 mode, or
press key to return to the measurement mode.
P1.5. – Set pH measurement of pure water with ammonia (Off – On)
1. Press key,
Off
flashes, then press
key,
On
flashes, when
parameter flashes, press key to confirm.
Off
–turn off temperature
compensation,
On
–turn on temperature compensation.
2. After confirm parameter, press
key to enter in P1.6 mode, press
key to return to the measurement mode.
P1.6. – Restore to factory default setting (NO – Yes)
1. Press key,
No
flashes, then press key,
Yes
flashes. Press
key to confirm, the meter returns to the measurement mode.
No
– Not
restore to factory default setting,
Yes
– restore to factory default setting.
2. When do not select
Yes
, press key to return to the measurement
mode.
6.4 Submenu of basic parameter setup (press key or key to switch)
P4.1. – Adjust timing storage time
1. In mode P4.0, press
key to enter in mode P4.1, refer to the left
diagram: “
00:
”: hours (0-99), “
:00
”: minutes (0-59).
2. Press key, “
:00
” flashes, then press
key, “
00:
” flashes.
When the number flashes, press
key and
key to adjust time
and press
key to confirm.
3. After confirm the parameter, press
key to enter in P4. 2 mode or
press
key to return to the measurement mode.
P4.2. – Select temperature unit (°C—°F).
1. Press
key, °C flashes, then press
key, °F flashes. When the
parameter flashes, press
key to confirm.
2. After confirm the parameter, press
key to enter in P4.3 mode or
press
key to return to the measurement mode.
P4.3. – Select backlight timing (1-2-3-On)
1. When press
key,“
1
” flashes, then press
key to select blinking
2
→
3
→
On. When the parameter flashes, press key to confirm.
Select
On
to turn on the backlight, the time unit is minute.
2. After confirm the parameter, press
key to enter in P4.4 mode or
press
key to return to the measurement mode.
Summary of Contents for SX811-BS
Page 23: ...20...
