Apelson UBINDJV60B, Manual

Page: 16 / 36

In
more
detail...
GB IE
If the display flashes alternately with the heat setting
This means that:
> you have not placed a pan on the correct cooking zone or,
> the pan you're using is not suitable for induction cooking or,
> the pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minutes if no suitable pan is
placed on it.
Using your Induction hob
When you have finished cooking
1. Touching the relevant zone select key (A) that you wish to switch off.
2. Press the “-”key will desrease the power to “0” level, or press the "+" and
"-" at the same time, the power level will desrease to 0 straight away.
3. Beware of hot surfaces
“H” will show which cooking zone is hot to touch. It will disappear when
the surface has cooled down to a safe temperature. It can also be used
as an energy saving function if you want to heat further pans, use the
hotplate that is still hot.
Using the boost function
Actived the boost function
1. Select the heating zone by touching the zone select key (A).
2. Touching the boost control key(F) “ ”the zone indicator show “P.” and
the power reach Max.
Cancel the boost function
1. Touching the relevant zone select key(A) that you wish to cancel.
1a. Touching the “-”key(D) to cancel the Boost function, then the cooking
zone will revert to level 9.
1b. Touching “-“ and “+”control together at the same time . the cooking zone
switch off and the boost function cancel automatically
> The function can work in any cooking zone.
> The cooking zone returns to level 9 after 5 minutes.
Operation
1 6