18
Error
Message
Possible Cause
What to do
No pot or pot not suitable;
Replace the pot;
ER03
Water or pot on the glass over the control
Clean the user interface
F1 E
The connection between the display board and the
left mainboard is fail (the cooking zone which
indicator showing “E”)
1.Connection cable not correctly plugged or
defective;
2.Replace the Mainboard.
F3 E
Coil temperature sensor failure. (the cooking zone
which indicator showing “E”)
Replace the coil sensor
F4 E
Mainboard temperature sensor failure. (the cooking
zone which indicator showing “E”)
Replace the mainboard
E1 E
Temperature sensor of the ceramic glass plate is
high
Please restart after the induction hob cools
down.
E2 E
Temperature sensor of the IGBT is high
Please restart after the induction hob cools
down.
E3 E
Abnormal supply voltage(too high)
Please inspect whether power supply is normal;
Power on after the power supply is normal.
E4 E
Abnormal supply voltage (too low)
Please inspect whether power supply is normal;
Power on after the power supply is normal.
E5 E
Temperature sensor failure(the cooking zone which
indicator showing “E”)
Connection cable not correctly plugged or
assemble defective;
Failur
e Displa y an d Inspection
I
f an abnormalit y come s up , th e inductio n ho b will ente r th e protectiv e stat e
automaticall y an d displ ay correspondin g protectiv e codes:
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and
damages to the induction hob and please contact the
service department
.
Technical Specification
Cooking Hob
UBINDECO60BZ
Cooking Zones
4 Zones
Supply Voltage
220-240V~
Installed Electric Power
6400W
Product Size L×W×H(mm)
590X520X58
Building-in Dimensions A×B (mm)
565X495
Weight and Dimensions are approximate. Because we continually strive to
improve our products we may change specifications and designs without prior
notice.
