16
Connectivity with hood
1. Cooker hood and the induction hob must be paired by radio frequency before
remote control can occur. This only needs to be done once.
2. When connected the power output of the induction hob will control the
extraction rate of the cooker hood.
Set up new linking method:
1. make sure that the hob and the hood is off.
2. Touch the timer key “ ”and floodlight key”
” on the hood panel
simultaneously. LED light on the hood panel will be flashing red and white
alternatively.
3.
Turn on the hob and make sure the connectivity indicator lamp is lighted up.
Note:Touch the connectivity key ”
” if the connectivity indicator is off .
NOTE: The red dot next to power level indicator will illuminate indicating th a t
zone is selected.
5. When cooking timer expires, the corresponding cooking zone will be swit c h
off automatically.
6. Other cooking zone will keep operating if they are turned on previously.
7. When using “the timer as an alarm” and “the timer to swith off the zones ”
together, the display will show the remaining time of alarm as firs t
priority. Press cooking zone to show the remaining time of switch off timer.
Befor e Firs t Use
•
You can link the hob with any cooker hood with RF Technology in our range.
Please contact the service department on 0344 800 1128 for advice if you
are unsure.
Once the hood and the hob are linked the speed of the hood will change
automatically according to the power level the hob is being used at.
The hob and hood have to be set up to link together. To achieve this follow
the connectivity function below
.
