Apelson AH60AURC, User Manual

Page: 19 / 24

Controlling the cooker hood remotely
01 Before First Use
This cooker hood model and a compatible induction hob model must be paired by Radio
Frequency (RF) before remote control can occur. This only needs to be done once. When
connected the power output of the induction hob will control the extraction rate of the cooker
hood.
02 To Set Up Connectivity
03 Using the connectivity function
1.
Ensure the connectivity indicator is lit on the hob control panel.
2. The extraction rate of the hood will vary based upon the total power output selected on the hob,
as shown in the table. Each hob cooking zone has a maximum rated output of 10 comprising
1- 9 and Boost (10).
IMPORTANT: This section is only applicable
if you have also purchased a
compatible induction hob with Radio Frequency (RF) capability. Contact the
Customer Helpline at the end of this manual for compatible models.
1. Make sure that the hob and the hood are switched off.
2.
Turn on the hob and make sure the connectivity indicator is lit red.
Note: Touch the
connectivity key
on the hob if it is not lit.
together for 3
together for 3 seconds
3. Turn on the hood, press and hold both Speed icons
seconds to enter Set Up mode.
4. Press and hold the Timer icon and Light icon
on the control panel and "A" will flash in the display.
5. Press the keys and together on the hob and the connectivity indicator
will flash to confirm connection.
6. The control panel of the hood will show "A" for five seconds to indicate
connectivity has been made with the hob.
7. Press the keys and together on the hob one more time to store the
connectivity settings.
19