English
7
Battery State/Charging
›
If the brightness of the LightCan is reduced to zero
(by "Blackout" or "Dimmer" button of the remote
control), the device will show the battery state at low
brightness:
o
LED glows green: battery level above 50%
o
LED glows red: battery level below 50%
Note: The calculation of the battery level needs at
least one full charge/discharge cycle.
›
If the battery is completely empty, the device will
blink 3 times red and turn itself off.
›
Connect the provided power supply (5V to 18V DC) or
the USB charging cable to the connector in the
bottom of the can.
›
The LightCan flashes red while charging. As soon as
the battery is fully charged, the device will flash
green.
›
The device can also be used while a power supply is
connected. In that case the battery will not be
charged (or very slowly).