English
9
Control by a light desk with DMX
You can control the LightCan also via DMX from a
professional light desk. To transmit the data wireless,
you need a W-APE Transceiver (or a MobiLight4).
›
Connect the W-APE Transceiver via a DMX cable to
the light desk.
›
Select "DMX" as "Control Mode" at the W-APE-
Transceiver. As soon as this mode is active, all
LightCans within the same group will use the DMX
data.
›
If a LightCan does not receive any DMX data for
more than 10 seconds, it will automatically switch
back to the remote control mode.
›
The group, the DMX address and the DMX mode of
each LightCan can be changed at a W-APE-
Transceiver (or MobiLight4). Directly after turning
on a LightCan, all W-APE Transceiver will change
the display menu and show the values of the
LightCan: The menu items are: "Remote Config",
"Group", "DMX Mode", "DMX Address" and "Info"
›
Use Menu up/down as normal, to toggle through the
menu items. Values can be changed by +/- and will
be applied instantly.
