APART PM1122 Instruction Manual Download Page 9

Instruction manual

PM1122

9

6.   Mic/line 1 to 4 level:

 use this knob to adjust the mic 1 to 4 level.

7.   S/C led: signal/clip led:

 the led lights up green when the mic 

signal is suffi ciently strong, and becomes red if the mic preamp 
is clipping. Turn the preset input trimmer of the corresponding 
input down at the back of the unit when the led becomes red. 
The red clip leds monitor the input circuit at all times, even 
when the level on the front panel is turned to the zero position.

8. 

 

Zone assign dipswitches:

 activate the dipswitches to assign mic/

line input 1 to 4 to zone 1 and/or zone 2 output. Dipswitch 
down = input assigned.

9.   Tone control mic/line 5 + link:

 turn the knob to darken the tone 

(turn to the left) or to brighten the tone (turn to the right).

10.  Mic/line 5 + link level: 

use this knob to adjust the mic/line 5 

level and/or the link input.

11.  S/C led: signal/clip led:

 the led lights up green when the mic/

line signal is suffi ciently strong, and becomes red if the mic 
preamp is clipping. Turn the preset input trimmer of the 
corresponding input down at the back of the unit when the led 
becomes red. The red clip leds monitor the input circuit at all 
times, even when the level on the front panel is turned to the 
zero position.

12.  Zone assign dipswitches:

 activate the dipswitches to assign mic/

line input 5 or the link input to zone 1 and/or zone 2 output. 
Dipswitch down = input assigned.

13. 

 

Zone 1 bass tone control:

 effective on music signals only.

14. 

 

Zone 1 treble tone control:

 effective on music signals only. 

Summary of Contents for PM1122

























Reviews: