APART PM1122, Instruction Manual

Page: 15 / 24

Instruction manual PM1122
15
10. Emergency level: adjust emergency level with this knob. Please
note that when the emergency switch is activated, the music
or mic/line mix signals will be muted and only the emergency
signal will be heard in zone 1 and 2. The emergency switch
does not activate the chime.
11. Chime level: use this knob to preset the chime level when mic1
or mic2 priority is activated. Please note that the chime signal
is also sent through the noise gate. If you set the noise gate
threshold at a high level, chime signal may be muted by the
noise gate. Set the noise gate threshold at a lower level instead
of boosting the chime level. The noise gate has been added to
mute unwanted mic noise and it is not a “vox” circuit !
12. Line A to D stereo line level inputs: these unbalanced cinch
connectors accept stereo line level signals coming from music
sources such as tuners or CD players, or even headphone outs
from portable music players, up to line levels coming from
professional mixing desks. Max input level is +14dBv !
13. Line A to D sensitivity preset: turn these knobs to preset the line
A to D levels so that they sound equally loud when switching
from one to another.
14. Mic mix output: this unbalanced cinch connector contains the
mic mix signal from mic/line inputs 1 to 5 and is meant to be
connected to another PM1122 in a chain.
15. Link input: this unbalanced cinch connector accepts the signal
from another PM1122 in a chain. You could also use it as a
mono unbalanced line 5 input. The level from this input is
adjusted with the front mic/line 5 + link knob.