16
Design cabinet loudspeaker
• MASK(4)(6)CT only: set the power selector in the required
position.
•
Warning: the 16 ohm setting is not compatible with 70 or
100 volt line amplifiers!
MASK4CT
MASK4CT
MASK6CT
MASK6CT
16 ohm position: for low impedance amplifiers only! This switch
position is not compatible with 70 / 100 volt line amplifiers!
Do not use the speaker on 100 volt speaker lines with the
power switch in this position! This position is the highest setting
compatible with 70 volt lines only!
