12
Design cabinet loudspeaker
• Determine the position where the ClickMount will be mounted
on the wall. Please allow a minimum distance of 105 mm for
MASK6C and 50 mm for MASK4C between the top of the
ClickMount and the ceiling is necessary when installing the
speaker in the upright position. The cable entry point is 95mm
below the top of the bracket. The cable can enter from the
rear of the bracket so that it is completely hidden from view.
The ClickMount MUST be mounted with the arrows facing
upwards!
• Now mark the four mounting holes on the wall. Use the built-in
spirit level for correct positioning of the ClickMount unit.
Drill the mounting holes and attach the ClickMount in place using
adequate hardware. Use only hardware capable of supporting the
speaker’s weight safely. Be careful when you drill the holes in the
wall: make sure not to drill into the speaker cables or other objects
hidden inside the wall.
