Instruction manual
LSC4S
9
Rear panel
1.
Power inlet:
Connect the power cord here.
2. Power switch:
Power the unit on and off.
3.
Ampifliers:
There are 8 class-D amplifiers in the LSC4S. Speakers
are connected with the included female euroblocks. Each
output is protected against short circuit, thermal overload and
DC error.
4. Line outputs:
These are line level signal outputs which are a
copy of the amplifier’s outputs 3A, 3B, 4A and 4B. They can
be used to feed a signal to a larger external amplifier so that
higher powered speakers can also be driven as part of the
demonstration system.
5. Line input 1 and 2:
The LSC4S has 2 stereo line inputs.
Line input 3 and 4:
These connectors are not in use.
6. FM Antenna:
This connector is not in use.
1
2
3
4
5
6
Summary of Contents for lsc4s
Page 1: ...LSC4S Instruction manual LSC4S...
Page 2: ...2...
Page 3: ...Instruction manual LSC4S 3 LSC4S...
Page 13: ...Instruction manual LSC4S 13...
