APART lsc4s, Instruction Manual

Page: 12 / 16

12
Loudspeaker comparator
Comparing speakers
Opening the link “ http://192.168.1.10 “ via your web browser will
open the GUI to control the comparator.
There are four “Out” buttons to activate the connected speakers.
Pushing “Out 1” button will switch OFF all speakers except the
speakers connected to output 1A and 1B. Pushing “Out 2” button
will switch OFF all speakers except speakers connected to output
2A and 2B and so on.
In this way you can compare easily the quality of multiple speakers.
There is no possibility to play multiple outputs simultaneously.
Note that there is no Equalizing of the signal, all speakers use the
same source, the same pre-amplifier and identical power amplifiers.
The MUTE button will switch OFF all speakers. To continue the
comparison, just click one of the four Out buttons.
With the Source buttons, you can switch over from Line Input 1
to Line Input 2 or vice versa. This selection will switch all outputs
simultaneously.
The volume slider will increase or decrease the volume of all
outputs simultaneously. When the volume of channel 1 is increased
and then channel 2 is selected, the volume of channel 2 will be
increased as well. In this way, the speakers will be compared at
equal volume level.