3
1
1 2
2
3
3
4
5
1. RJ45 connector
2. Power supply connector
3. IR learning eye/reset switch
4. IR module
5. RS232 module
NETKIT-IR
NETKIT-RS
• Netkit help
: this tool searches for Netkit units in your network and allows easy
access, hardware and network specific configuration of the units. Use this tool
first! It will make further programming easier.
•
Netkit convert
: converts hexadecimal commands to commands in Netkit
specific format and vice versa.
•
Netkit learn
: capture infrared commands and save them in Netkit specific,
hexadecimal or uncompressed formats.
• Netkit test
: test your commands before using them in your specific application.
3 mm. The LED’s on the front of the Netkit unit will rapidly blink in unison,
indicating a reset. Use a light touch when resetting your Netkit unit, as force may
damage your Netkit hardware irreparably.
For easy programming and Netkit setup, four dedicated applications are available
for download on our website. You will need a Windows PC connected to a network
via a router and at least one available network connection on the router. Set the
router to DHCP mode for easy discovery of the Netkit units. With the configuration
tools, you can easily assign fixed IP addresses if necessary.
figure 1
