APANTAC LLC
www.apantac.com
11
OG
-
US
-
5000 User Manual
Network Tab:
Networking:
To change networking parameters:
•
Make any desired changes on the Network Tab on the right side of the Dashboard screen. After making a
change in one text field, click on another field.
•
Pull and reseat the US
-
5000 to power
-
cycle and reboot the unit. The Ethernet adapter of the card usually re-
quires a power
-
cycle to make network changes effective.
Note:
to utilize Ethernet networking directly to the Apantac OG
-
US
-
5000 the openGear frame must have an
‘
Advanced Networking
’
control card. This control card includes an internal Ethernet switch in addition to the
openGear
’
s standard CANBUS communications utilized by the Dashboard software. The control card resides
in slot 0 of the frame and will have an
‘
N
’
in the model number to indicate advanced networking.
Networking functions:
The primary function of networking is for when this model is used within a stand
-
alone chassis outside of the
openGear frame. The network connection is also used for certain firmware updates.
