Apantac OG-US-5000, User Manual

Page: 12 / 16

APANTAC LLC www.apantac.com 10
OG - US - 5000 User Manual
Display Tab:
Extended Display ID (EDID):
The HDMI video input port of the US - 5000 includes a programmable EDID. DVI and HDMI sources will read this
EDID and detect the US - 5000 as a monitor. The US - 5000 EDID can be set to the generic, factory set EDID or it can
copy the EDID of any monitor attached to its HDMI output.
To copy the EDID of a monitor:
•
Connect the US - 5000 ’ s HDMI video output port to an input of the desired monitor or equipment which contains
the EDID you wish to copy. Monitor or equipment should be powered on.
•
Disconnect both the HDMI and the SDI video inputs to the US - 5000. (the unit must be idle)
•
Pull and reseat the US - 5000 to power - cycle and reboot the unit. Wait 30 seconds for boot to complete.
•
Click the “ Read EDID from current display ” option on this tab page.
•
The EDID Status line will indicate the EDID is being copied, and then return to ‘ ready ’.
To reset the EDID to its factory default:
•
Disconnect both the HDMI and the SDI video inputs to the US - 5000. (the unit must be idle)
•
Pull and reseat the US - 5000 to power - cycle and reboot the unit. Wait 30 seconds for boot to complete.
•
Click the “ Reset to default ” option on this tab page.
•
The EDID Status line will indicate the EDID is being reset, and then return to ‘ ready ’.