APANTAC LLC
www.apantac.com
12
OG-US-4000 User Manual
Network Tab:
Networking:
To change networking parameters:
Make any desired changes on the Network Tab on the right side of the Dashboard screen. After making a
change in one text field, click on another field.
Pull and reseat the US-4000 to power-cycle and reboot the unit. The Ethernet adapter of the card usually re-
quires a power-cycle to make network changes effective.
Note:
to utilize Ethernet networking directly to the Apantac OG-US-4000 the openGear frame must have an
‘Advanced Networking’ control card. This control card includes an internal Ethernet switch in addition to the
openGear’s standard CANBUS communications utilized by the Dashboard software. The control card resides
in slot 0 of the frame and will have an ‘N’ in the model number to indicate advanced networking.
Networking functions:
The primary function of networking is for when this model is used within a stand-alone chassis outside of the
openGear frame. The network connection is also used for certain firmware updates.
