Cleaning time /Air volume output/Ion balance adjustable
CT
TH
→ +/-
CFM → +/-
IB
N
→ +/-
CAL → OK
CAL →
Cleaning time setting
Set a reminder for the cleaning time at will. Blue light flashes indicates cleaning is required. The electrode needle
cleaning cycle should be set according to the working environment when using the ionizing air blower. Cleaning cycle
should be shorten appropriately in environment with more moisture and dust.
Air volume output adjustable
Fan speed in five gears. Adjust the air volume according to the installation distance of the static eliminator and the
status of the target object.
Ion balance adjustable
The ion balance voltage can be adjusted by adjusting the negative high voltage
amplitude remotely.
Intelligent Remote Control
TIME
TIME
Reduce the negative high voltage amplitude,
the negative ion output decreases
Adjust ion balance voltage
Function
Symbol
Operation instructions
Button Function instructions
Unlock
Run
/
Pause
Clean
Adjust clean time
Adjust air volume
Adjust ion balance
Confirm
Reset
Unlock before adjusting operating parameters; 30s delay if any key is
pressed, exit and re-locked if no key is pressed.
Device starts running when power is on. Press "STOP" to standby and no
high voltage output. Press "RUN" again and the device will start working.
Press the button to clean the needle once.
Press CT
TH
first, and then press +/- to increase or decrease the
cleaning cycle. Minimum adjustment unit 1H.
Press CFM first, then press +/-,air volume from high to low is 1,2,3,4,5.
Press IB
N
first, then press +/- to adjust the ion balance voltage.
Note: Press CAL first, then press OK to confirm after adjusting the
output parameter; otherwise, false alarms are likely to occur.
Reset
（150Hz、50%、4H）：
Press
CAL
first
，
then
press
Press IB
N
first, then press + when the positive voltage on flat panel charge detector or object surface is high, press IB
N
first, then press - when
the negative voltage on flat panel charge detector or object surface is high until the ion balance reaches the ideal status.
