AH651
User's Manual
3. Follow the steps given in “
3. Enrolling Fingerprints
” to start using the device.
5
3.1 Enrolling Fingerprints for Administrators
AH651 can save up to 10 fingerprints: 2 for administrators, 8 for users, and 1 for administrator
password. When using the device for the first time, you will be required to set up the administrator
password with administrative permission, i.e. Admin. Only when the administrator password is
registered completely, you as administrator can create accounts and enroll fingerprints for general
users.
Every time you want to enroll fingerprints or manage fingerprints that have already been registered,
please run the fingerprint management application.
This chapter explains how to register fingerprints for administrators and users.
To enroll fingerprints for administrators :
1. Double click to launch the application.
2. Register administrator password: Input new password, followed by confirming the new password again.
3. Enrolling Fingerprints
Note :
Enrolling administrator’s fingerprints upon first use is only supported on Windows XP and later. The device cannot
be used under other environments, such as Mac and Linux, until the enrollment for administrators is completed.
Note
:
During the first time of use of the fingerprint flash drive, please be sure to register the administrator password.
After the registration is completed, if you wish to change the administrator password, please refer to “
4. Managing
Administrator and User Accounts
”.