Charging micro Lithium Power Pack:
1.
With the charger
Connect the charger to a power socket and connect the charger cable with the 12 V port of the Power Pack.
2.
With the MV charger cable
Plug the 12 V MV plug into a 12 V power socket in the motor vehicle and connect the charger cable with the
12 V port of the Power Pack.
Control lamps:
Press the push-button on the side of the device to check the battery level.
Control lamps
1 blinks
1 permanent 2 permanent 3 permanent 4 permanent
Battery level
0 %
25 %
50 %
75 %
100 %
The control lamps light up successively during the charging process; the number of permanently lit control
lamps indicates the battery level of the Power Pack. If all control lamps are lit up permanently, the charging
process is completed.
Jump-start assistance for 12 V motor vehicles:
1.
Ensure that at least three control lamps of the Power Pack are
lit up permanently and that the battery
poles are not contaminated or oxidised.
2.
Separate the Power Pack and the jump
-
start cable.
3.
First connect the red pole clamp of the jump
-
start cable with the plus pole and subsequently the black
pole clamp with the mi
nus pole of the MV battery. The pole clamps have to be firmly and safely
connected to the battery poles.
4.
Connect the Power Pack to the jump
-
start cable and ensure that the plug is connected firmly and
safely.
5.
Start the engine. If the attempt to start was n
ot successful, please wait at least three minutes before
starting the next attempt. Do not attempt a further start after the third failed attempt, but check your
vehicle for defects.
6.
First separate the Power Pack from the jump
-
start cable within 30 seconds
after the engine has started
running and only then remove the pole clamps from the battery poles.
Loading of USB devices:
Connect the USB adapter to the USB port of the Power Pack. Select the suitable adapter for your USB
device and connect it. Press the push-button at the side of the Power Pack to start the charging process.
Usage of LED lamp/hazard lights:
In order to switch on the LED lamp, keep the push-button at the side of the Power Pack depressed for
approx. 3 seconds. You can subsequently consecutively activate the following light functions by repeated
pressing of the push-button: blinking, SOS, off.
Cleaning, storage, maintenance
Cleaning:
Clean the micro Lithium Power Pack only with a soft cloth and do not use aggressive cleaners or
solvents.
