CAUTION:
Improper usage can cause serious injury to personnel
and/or
damage to equipment and work area. For your own safety,
please observe the following precautions.
SAFETY PRECAUTIONS
●
Check each component after opening the package to make sure
everything is in good condition. If there are any suspected
damage, do not use the item and report the issue to your vendor.
●
Turn OFF the main power switch and unplug the device from
power source when moving the device.
●
Do not strike or subject the main unit (and all its components) to
physical shock. Use carefully to avoid damage to any part.
- Never drop or sharply jolt the unit.
- Contains delicate parts that may break if the unit is dropped.
●
Make sure the equipment is always grounded. Always connect
power to a grounded receptacle.
●
Temperature may reach as high as 480°C when switched ON.
- Do not use the device near flammable gases, paper and other
flammable materials.
- Do not touch heated parts, which can cause severe burns.
- Do not touch metallic parts near the tip.
●
Disconnect the plug from the power source if the unit will not be
used for a long period.
- Turn off power during breaks, if possible.
●
Soldering process produces smoke, use on well ventilated places.
●
Do not alter the unit, specifically the internal circuitry, in any
manner. HIGH VOLTAGE present inside the unit. DO NOT
attempt to service equipment.
4
SPECIFICATION
MAIN STATION
Voltage Input :
available in 110V / 220V
Station Dimensions:
51(w) x 59 (h) x 85 (d) mm
Weight:
235 grams
Power Consumption:
75W
Temperature Range:
200°C - 480°C
Heating Element
PTC Ceramic heater
PTC ceramic voltage:
110/220 V
FUNCTIONS and FEATURES
•
Closed loop temperature controlled Soldering station.
•
PTC ceramic heater and removable tip design.
•
High power heating element for fast heat recovery.
•
Temperature control knob for easy adjustment.
•
Portable and lightweight system.
5
CAUTION:
Improper usage can cause serious injury to personnel
and/or
damage to equipment and work area. For your own safety,
please observe the following precautions.
SAFETY PRECAUTIONS
●
Check each component after opening the package to make sure
everything is in good condition. If there are any suspected
damage, do not use the item and report the issue to your vendor.
●
Turn OFF the main power switch and unplug the device from
power source when moving the device.
●
Do not strike or subject the main unit (and all its components) to
physical shock. Use carefully to avoid damage to any part.
- Never drop or sharply jolt the unit.
- Contains delicate parts that may break if the unit is dropped.
●
Make sure the equipment is always grounded. Always connect
power to a grounded receptacle.
●
Temperature may reach as high as 480°C when switched ON.
- Do not use the device near flammable gases, paper and other
flammable materials.
- Do not touch heated parts, which can cause severe burns.
- Do not touch metallic parts near the tip.
●
Disconnect the plug from the power source if the unit will not be
used for a long period.
- Turn off power during breaks, if possible.
●
Soldering process produces smoke, use on well ventilated places.
●
Do not alter the unit, specifically the internal circuitry, in any
manner. HIGH VOLTAGE present inside the unit. DO NOT
attempt to service equipment.
4
SPECIFICATION
MAIN STATION
Voltage Input :
available in 110V / 220V
Station Dimensions:
51(w) x 59 (h) x 85 (d) mm
Weight:
235 grams
Power Consumption:
75W
Temperature Range:
200°C - 480°C
Heating Element
PTC Ceramic heater
PTC ceramic voltage:
110/220 V
FUNCTIONS and FEATURES
•
Closed loop temperature controlled Soldering station.
•
PTC ceramic heater and removable tip design.
•
High power heating element for fast heat recovery.
•
Temperature control knob for easy adjustment.
•
Portable and lightweight system.
5
