TABLE OF CONTENTS
Product Description ……………………….…...3
Package Inclusion …………………………….3
Safety Precautions ………………….…………4
Specifications ……………………………..……5
Functions and Features…………….….………5
Control Panel Guide ………………….……….6
Operating Guidelines………………………… 6— 7
This manual is designed to familiarize and
instruct the technician with the proper operation
and maintenance of the equipment. The “Care
and Safety Precautions” section explains the
hazards of using any type of soldering or
reworking device. Please read carefully and
observe the guidelines in order to maximize
usage and minimize the risk of injury or
2
OPERATING GUIDELINES
3. Be sure the power switch is OFF before connecting or
disconnecting the soldering iron cord. Failure to do so
may result in damage to the circuit board.
4. The unit is now ready for use.
B. TEMPERATURE CONTROL
1. Turn the power ON. LED indicator will light up
indicating system is now turned “On”.
2. To Increase the temperature, turn the Temperature
control knob clock wise. To decrease Set temperature,
turn the Temperature control knob counter clockwise.
3. The LED indicator lamp will light a RED lamp when the
system is heating up the tip to desired temperature.
Upon reaching the set temperature the LED indicator
lamp would start blinking (switching between the color
red and green). A blinking indicator lamp signifies the
desired tip temperature has been reached and
soldering may start.
7
TABLE OF CONTENTS
Product Description ……………………….…...3
Package Inclusion …………………………….3
Safety Precautions ………………….…………4
Specifications ……………………………..……5
Functions and Features…………….….………5
Control Panel Guide ………………….……….6
Operating Guidelines………………………… 6— 7
This manual is designed to familiarize and
instruct the technician with the proper operation
and maintenance of the equipment. The “Care
and Safety Precautions” section explains the
hazards of using any type of soldering or
reworking device. Please read carefully and
observe the guidelines in order to maximize
usage and minimize the risk of injury or
2
OPERATING GUIDELINES
3. Be sure the power switch is OFF before connecting or
disconnecting the soldering iron cord. Failure to do so
may result in damage to the circuit board.
4. The unit is now ready for use.
B. TEMPERATURE CONTROL
1. Turn the power ON. LED indicator will light up
indicating system is now turned “On”.
2. To Increase the temperature, turn the Temperature
control knob clock wise. To decrease Set temperature,
turn the Temperature control knob counter clockwise.
3. The LED indicator lamp will light a RED lamp when the
system is heating up the tip to desired temperature.
Upon reaching the set temperature the LED indicator
lamp would start blinking (switching between the color
red and green). A blinking indicator lamp signifies the
desired tip temperature has been reached and
soldering may start.
7
