10
CONTROL PANEL GUIDE
LEGEND:
1
— Hot air gun temperature adjustment buttons
2
— Hot air gun airflow adjustment buttons
3
— Soldering iron temperature adjustment buttons
4
— Hot air gun connection outlet
5
— Soldering iron receptacle (3pin)
6
— Digital display panel of hot air gun temperature
Prefixes and meanings:
“
H
” actual temperature
“
h
” temperature being set
“
C
” cooling down
“
---
” sleep off mode display
“
OFF
” function deactivated display
7
— Digital display panel of airflow level
Prefix and meaning:
“
P
”
both for actual airflow and airflow being set
8
— Soldering iron temperature
Prefixes and meanings:
“
H
” actual temperature
“
h
” temperature being set
9
— Hot air gun function switch
10 — Soldering iron function switch
1
2
3
4
5
9
10
6
7
8
23
NOTE:
During sleep mode, the soldering iron temperature display
panel will show an alldash, “
----
” (see figure
(c)
above).
OPERATING GUIDELINES
J. Activating Soldering Iron AutoSleep Mode
Aside from the autosleep mode feature of the hot air gun, the device
has a separate mechanism to put the soldering iron into SLEEP mode after
being idle for a certain period. This is deactivated, by default, and the user
must do the following set of procedures in order to activate this feature.
CONDITION:
SOLDERING IRON function is inactive.
1. While soldering iron is “
OFF
” or in standby mode, push both UP and
DOWN buttons of the SOLDERING IRON TEMPERATURE adjustment
buttons (“3” from the CONTROL PANEL GUIDE page).
2. Wait until “
t
001
” or“
t
0FF
” (see figure
(a)
below) appears from sol
dering iron temperature display panel. This corresponds to a
1
minute
countdown
t
ime before the soldering iron goes to sleep mode.
3. Release the two buttons after the change in display.
4. Use the same two buttons to adjust the countdown time.
5. Confirm the change by activating the SOLDERING IRON switch. This
will now be used as the countdown parameter before the soldering
iron goes to sleep and will remain active until the soldering iron has
been deactivated or when the system has been powered OFF.
6. To
DEACTIVATE
this feature, simply follow the above procedures.
This time, select “
t
OFF
” (see figure
(b)
below) .
