Operation manual: For first time use, need to frequency bind.
● Take out the remote control and install the battery.
● Hold the 'M' button for 2-4 seconds – the indicator will flash.
● Switch on the car, When the indicator light stays on, the frequency bind
is successful.
● If the frequency bind failed (indicator keeps flashing), remove the battery
and repeat steps 1-3.
● When the remote control has not been used for 10 seconds, the
indicator will switch to power saving mode.
● Button Description: forward, backward, turn left, turn rights,
Speed P.
Emergency brake, when pressed, the car will come to a stand still. Press
again to release break.
Remote control instructions
Loosen the screw with a screwdriver, then insert two AAA batteries.
Place the battery cover, then tighten with a screw.
Forward/backward button
Turn left/right button
Brake button
Speed change button
Frequency bind button
Summary of Contents for Mercedes-Benz SLC 300 Final Edition 370-222V80
Page 19: ......