10. Receiver menu setup of ARD300
１）
The radio receiver is switched OFF.
２）
Switch ARD300 ON. The switch is located on the rear panel.
The firmware version will be displayed.
The start-up procedure is complete when a white dot is flashing slowly at the lower right
corner.
３）
Press the ESC key for 2 seconds to enter the receiver selection menu.
４）
With the ▲ or ▼ key, scroll through the receiver selection menu until the name
corresponding to you receiver is displayed, and validate with the ENTER key.
ARD 300 display
Receiver type
AR86 10
AR8600MK2 (set to 10.7MHz IF)
AR86 45
AR8600MK2 (modified for 45.05MHz IF)
AR5000A
AR5000, AR5000A, 3
AR5001D
AR5001D
AR6000
AR6000
AR2300
AR2300
AR8200
For Japanese AR8200MK3 model only
IF 10.7
For non-AOR receiver with 10.7MHz IF output
IF 45.05
For non-AOR receiver with 45.05MHz IF output
ARD300
Ver
.
309F
.
>AR5001D
RECE
I
VER
>AR86
1
0
15