Press the
[CONTROL]
switch key located on the lower left side of the receiver once. The red LED above
the
[CONTROL]
switch will start blinking and the first recorded audio file will play.
To play the next file, press the
[CONTROL]
switch while the current file is being played.
To play the previous file, double click the
[CONTROL]
switch.
To
stop
, press and hold the
[CONTROL]
key for two seconds. The red LED will go off.
1-3 File management
To edit or delete recorded files, remove the SD card from the AR8200D and insert it into your PC using
the adapter. The AR8200D unit does not have the file management function.
2
CTCSS DECODER
CTCSS (Continuous Tone Controlled Squelch System) function enables the AR8200D to selectively
receive only specifically modulated sub-audible tones or to verify the CTCSS frequency used.
[Note]: This FUNCTION operates only in NFM mode.
To activate CTCSS, perform the following steps:
1. In normal receive mode, double click the
[CONTROL]
switch located on the digital control unit.
(In the other modes, press and hold the
[CLEAR]
key for two seconds to remove
“v nnn” from the
LCD.)
2. Double clicking the
[CONTROL]
switch will toggle through the APCO25 mode (one beep), Voice
Inverter mode (two beeps, not available for US consumer model), and CTCSS mode (three
