background image

ADDITIONAL FUNCTIONS 

 

The AR8200D (or upgraded AR8200MK3) includes the following additional functions: 
 
1.  Voice recording 
2.  CTCSS decoder 
3.  Voice inverter (for Government version only) 
4.  APCO25 (P25) decoder 
5.  USB interface 
 
 

1

   

VOICE RECORDING

 

 
The AR8200D has a built-in SD memory card interface used for voice recording. 
The  recording  may  be  played  back  over  and  over.  The  recorded  files  are  in  wav  format  and  can  be 
played back using a PC. 
 
Recording specifications: 
 

  Maximum recording time: About 68 hours 

  Sampling frequency: 18 kHz, 16 bit, monaural 

  File name format: 00000000.wav ~ 99999999.wav 

  Extended  recording  times  (more  than  about  1.7  hours)  will  be  saved  as  separate  files  with 

100MB size. 

  Card type: SD, SDHC 

  File system: FAT16, FAT32  

  

1-1   Recording 

 
1.  Before recording is started, be sure that the supplied micro SD memory card has been inserted into 
     the card slot located on the bottom of the receiver. 
 

    

  

 

 
2.  Power the receiver on and wait for the first beep, then wait for the second high pitched beep. 
3.  Press and hold the 

[CONTROL]

 switch located on the lower left side of the receiver for two seconds. 

     The red LED above the 

[CONTROL]

 switch will start blinking to indicate the recording process is 

     started. 

 

Summary of Contents for AR8200D










Reviews: