AR8000 operating manual
103
Make sure that the EXPERT status is selected, if not use the UP/DOWN key to
move the cursor alongside the “NEWUSER” option and rotate the [DIAL] so
that the legend “EXPERT” is displayed. Press [ENT] to accept the changes.
The process of copying specific data is initiated using the “SET COPY” menu
which is accessed by pressing [FUNC] [0] while in EXPERT status.
Use the [DIAL] to select “SEND-MODE” for the receiver which will SEND the
data and “RCV-MODE” for the receiver which will RECEIVE the data.
There are three options for copy:
1.
ALL-DATA: To duplicate an exact copy of one AR8000 with another. This
is identical to using NEWUSER mode and takes about 5 to 6 minutes.
2.
SYS-DATA: To duplicate only the system data such as AUTO MODE and
takes about 1 to 2 minutes.
3.
BANK-DATA: To duplicate the MEMORY and SEARCH banks of one set
to another. Select the appropriate bank by rotating the DIAL before
initiating copy.
Press [CLEAR] now to suspend the copy process. Should you press
[CLEAR] while copying, the receiver may become operationally unstable.
Press [ENT] to start the copy process. The display “=>” will appear on the
LCD to indicate that COPY is in progress.
In order to successfully run the copy functions, the two sets must be in the
SAME COPY MODE.
When copying BANK DATA, you may select a different bank in each set. For
example, you may copy the data from bank “A” of the first set to bank “B” of
the second.
(20) Trouble shooting
Should you experience problems with the receiver “apparently doing something
unexpected”, simply switch Off the receiver using the main power switch and
leave it for about 10 seconds. Switch the receiver back on again and check if
the problem has been cleared.
If an error message appears on the display, refer to section 20-3 of this
message for an explanation.
20-1 Microprocessor reset
Should the receiver still refuse to operate correctly, switch the receiver OFF,
hold the [CLEAR] key while switching the receiver On.
Summary of Contents for AR8000
Page 15: ...AR8000 operating manual 15...
Page 25: ...AR8000 operating manual 25...
Page 29: ...AR8000 operating manual 29...
