4. Configuration
Printer Control Panel & Status Indicator
4.1) Panel LED Indicators
1. Power ( POWER) LED: Green
On: Power is stable
Off: Power is not stable
2. Error( ERROR) LED: Red
On: Off line (except during paper
feeding using the FEED button and
test printing, and the error state.)
Off: Normal condition
3. Paper roll end (PAPER OUT) LED: Red
On: The paper roll near end is detected.
Off: Paper is loaded (Normal condition).
-10-
4.2) DIP Switch Settings
The DIP switch panel is locating at bottom of the printer as shown:
DIP Switch Functions:
Note: Before configure the DIP switch settings, please first turn the printer
power off and remove the paper roll.
(*) Baud Rate is only available for serial interface models.
POW ER
OUT
ERROR
FEED
PA P E R
Summary of Contents for T220III
Page 9: ...14 15...
Page 10: ...16 17...
