23
Auto-detection scan
Auto-detect sensor: By setting Enable, the scanner will start operating if any nearby object has been
detected. The laser light of scanner stops scanning when there is a successful reading or no code is
decoded after the Stand-by duration elapsed. Once the laser light stops scanning, the present object
must be removed to enable Auto-detect sensor.
Operating mode:
In stand-The scanner must be placed in the stand to enable Auto-detect sensor.
Always ON-Auto-detect sensor is enabled regardless of the placement of the scanner.
SETUP
Option bar code
Option
Alpha. entry
Auto-detect sensor
Disable
Enable
00
01*
Operation mode
In stand
Always ON
00*
01
Stand-by duration
00-99 (second)
00-99
04*
END
