![background image](http://html1.mh-extra.com/html/aopos/anypos600/anypos600_user-manual_2951236023.webp)
Anypos600
Point of Service
Ensure the printer prints the same as the typing on the screen. Return from the
sub-menu press Esc.
CustDisplay:
Tests the customer display. Ensure the customer display shows the same
numbers and characters as input on prompt. Return by pressing Esc.
KeyBoard:
Tests the keyboard, ensure the character and ASCII code displaying on the
screen is the same as the key you press on prompt. Return from the
sub-menu press Esc.
Drawer:
Tests the drawer. Open and close the drawer, ensure the screen shows the
status correctly: open, close.
MSR:
Tests the Magnet Stripe Reader. Scan a credit card and ensure data scanned
correctly by seeing applicable information on all three tracks from the credit card.
Return from the sub-menu press Esc.
Scanner:
Test the Scanner. Scan the barcode on prompt and ensure the information on
the screen. Return from the sub-menu press Esc.
IC CardReader:
Tests the IC CardReader. Insert IC Card on prompt, the item will test
the device connection and IC card read and written.
Port:
Tests the serial ports and parallel ports on the mainboard.
HOT
――
For QA
EXIT
――
Quit
Setup the Touchscreen
Setup the 5-wires-resistive Touchscreen
After successfully installing the diver, the following icons will appear on your desktop.
click on the “TouchKit” icon on the desktop, the system will enter calibration interface.
18