Hardware Installation
User's Guide
2-7
1.
Locate the AGP bus expansion slot, make sure this slot is unobstructed.
2.
Remover the corresponding expansion slot cover from the computer
chassis.
3.
Ground yourself to an anti-static mat or other grounded source.
4.
Position the card directly over the AGP slot and insert one end of the
card down into the slot. Be sure the metal contacts on the bottom of the
host adapter are securely seated in the slot.
5.
Connect your analog monitor's 15-pin VGA connector to the card and
fasten the retaining screws(if any).
6.
Connect other cables and devices if available.
7.
Now you are ready to install the software drivers and utilities.
For Systems with existing VGA card
1.
Change your display driver to Standard VGA.
2.
Shut down your computer and unplug all electrical cards.
3.
Replace the existing VGA card with the PA3020 Series graphics card.
4.
Restart your computer and install the PA3020 Series display driver.
