AT*Hn Link Negotiation Speed
This command is included only for compatibility and performs no
function.
*H0 *H0 command.
*H1 *H1 command.
*H2 *H2 command.
AT-Kn MNP Extend Services
Enables or disables conversion of a V.42 LAPM connection to an MNP
10 connection.
The parameter value, if valid, is written to S40 bits 0 and 1.
AT-K0 Disables V.42 LAPM to MNP 10 conversion. (Default.)
AT-K1 Enables V.42 LAPM to MNP 10 conversion.
AT-K2 Enables V.42 LAPM to MNP 10 conversion; inhibits MNP Extended
Services initiation during V.42 LAPM answer mode detection phase.
AT-Qn Enable Fallback to V.22bis/V.22
This command is included only for compatibility and performs no function.
AT-Q0 AT-Q0 command.
AT-Q1 AT-Q1 command.
AT@Mn Initial Cellular Power Level Setting
This command is included only for compatibility and performs no
function.
@M0 @M0 command.
.
.@M30 @M30 command.
AT-SEC=n Enable/Disable MNP10-EC
Enables or disables MNP10-EC operation. The command format is:
AT-SEC=n, [<tx level>] where <tx level> is the optional transmit
level sub parameter.
AT-SEC=0 Disable MNP10-EC; the transmit level is that defined in S91.
AT-SEC=1, [<tx level>] Enable MNP10-EC; the transmit level will be
defined by the sub parameter <tx level> range 0 to 30 (0 dBm to -30 dBm), the
default <tx level> (<tx level> not specified) is the S91 value.
AT:En Enable Compromise Equalizer
This command is included only for compatibility and performs no
function.
AT:E0
AT:E0 command.
AT:E1
AT:E1 command.
