If you encounter any trouble to boot you system, follow the
procedures accordingly to resolve the problem.
Online Manual:
Please check the manual carefully and make sure the
jumper settings and installation procedure are correct.
http://english.aopen.com.tw/tech/download/manual/default.htm
1
1
Test Report:
We recommend choosing board/card/device from the
compatibility test reports for assembling your PC.
http://english.aopen.com.tw/tech/report/default.htm
2
2
FAQ:
The latest FAQ (Frequently Asked Questions) may contain a
solution to your problem.
http://club.aopen.com.tw/faq/
5
5
Download Software:
Check out this table to get the latest updated
BIOS/utility and drivers.
http://english.aopen.com.tw/tech/download/default.htm
3
3
News Group:
Our support engineer or professional users on the news
group probably had answered your problem.
http://club.aopen.com.tw/forum/
4
4
Contact Distributors/Resellers:
We sell our products through resellers
and integrators. They should know your system configuration very well and
should be able to solve your problem efficiently and provide important
reference for you if next time you want to buy something else from them.
6
6
Contact Us
: Please prepare detail system configuration and error symptom
before contacting us. The
part number
,
serial number
and
BIOS version
are also very helpful.
7
7
Then connect your monitor and keyboard.
The problem was probably caused
by power supply or motherboard
failure. Please contact your reseller
or local distributor for repairing.
Perhaps your monitor is defective.
No
Yes
No
Yes
It is very possible that your keyboard
is defective.
During system rebooting, press Del to enter BIOS Setup. Choose
“Load Setup Default".
The problem should be caused by the
IDE cables or HDD itself.
Re-install Windows 2000.
Yes
Yes
Turn off the power and unplug the AC power cable, then remove all
of the addon cards and cables, including VGA, IDE, FDD, COM1,
COM2 and Printer.
Turn on the power, and check if
the power supply and CPU fan
work properly.
Start
Check if there is display.
Press Ctrl, and Alt key at the
same time, hold them and then
press Del to see if the
system reboots.
Turn off the system and
re-connect the IDE cable.
Check if the system can
reboot successfully.
End
No
No
Clear CMOS
