1. Installing CPU
2. Installing CPU & Housing Fan
Everything you need to boot
this motherboard is included in
this Easy Installation Guide.
For more information, a
complete
Online User's Manual
can be found in the
Bonus
Pack CD
. Thanks for the help
of saving our earth.
PART NO: 90.56J30.002 DOC. NO: AX4SU-EG-E0211A
¾
Screw Pack for I/O Port
¾
Easy Installation Guide x 1
¾
Jumper setting sticker label x1
¾
Ultra320 SCSI Cable x 1 (AX4S Plus-U only)
¾
Bonus Pack CD x 1
¾
Norton Anti-Virus CD x 1
¾
Floppy/IDE Cable Package
¾
User Manual x1
Plug in the CPU fan cable to the 3-pin
CPU FAN
connector and housing fan cable to the
HFan
connectors.
1.
Pull up the CPU socket lever and up to
90-degree angle.
2.
Locate Pin 1 in the socket and look for a
(golden) cut edge on the CPU upper interface.
Match Pin 1 and cut edge. Then insert the
CPU into the socket.
3.
Press down the CPU socket lever and finish
CPU installation.
Note:
If you do not match the CPU
socket Pin 1 and CPU cut edge
well, it may damage the CPU.
CPU Pin 1 and cut edge
CPU socket lever
Note:
Some CPU fans do not have sensor pin, so that
cannot support fan monitoring.
GND
+12V
SENSOR
CPU FAN1
GND
+12V
SENSOR
HFan 3
GND
+12V
SENSOR
HFan 1
GND
+12V
SENSOR
HFan 2
