After you finish the setting of jumpers and connect correct cables. Power on
and enter the BIOS Setup, press <Del> during POST (Power On Self Test).
Choose "Load Setup Defaults" for recommended optimal performance.
15. Power-on and Load BIOS Setup
16. AOpen Bonus Pack CD
You can use the autorun menu of Bonus CD. Choose the utility and driver and select
model name.
Del
Warning: Please avoid of using "Load
Turbo Defaults", unless you are sure
your system components (CPU,
SDRAM, HDD, etc.) are good enough for
turbo setting.
Pin 1
(User Upgrad Optional)
S-Terminal
AV-Terminal
This motherboard comes with a TV Output connector, which allows you to accept digital graphic
input signal, and encodes, and transmit data through DVI or TV Output. Both NTSC and PAL TV
formats are supported for this function. You may just install a TV Output module (as shown) to
your back panel, connect S-Terminal or AV-terminal to your TV, then use it as your another
monitor.
14. TV Output Connector (for AK79G-V, AK79G-VN & AK79G-1394)
17. BIOS Upgrade under Windows Environment
You may accomplish BIOS upgrade procedure with EzWinFlash by the following steps,
and it’s STRONGLY RECOMMENDED to close all the applications before you start the
upgrading.
1. Download the new version of BIOS package zip file from AOpen official web site. (ex:
http://english.aopen.com.tw
)
2. Unzip the download BIOS package (ex: WAK79G1394102.ZIP) with WinZip
(
http://www.winzip.com
) in Windows environment.
3. Save the unzipped files into a folder, for example, WAK79G1394102.EXE &
WAK79G1394102.BIN.
4. Double click on the WAK79G1394102.EXE, EzWinFlash will detect the model name
and BIOS version of your motherboard. If you had got the wrong BIOS, you will not
be allowed to proceed with the flash steps.
5. You may select preferred language in the main menu, then click [Start Flash] to start
the BIOS upgrade procedure.
6. EzWinFlash will complete all the process automatically, and a dialogue box will pop
up to ask you to restart Windows. You may click [YES] to reboot Windows.
7. Press <Del> at POST to enter BIOS setup, choose "Load Setup Defaults", then
“Save & Exit Setup”. Done!
It is strongly recommended NOT to turn off the power or run any application during
FLASH PROCESS.
6
5
2
1
Composite
GND
Luma
Chroma
GND
Key
