AOLIER MS-4001, Instruction Manual

Page: 8 / 12

7
4.Clamp the feeding table into the slot of the feeding plate, and install the thumb protection plate
and the pressing plate respectively.
5.Freely rotate the thickness adjustment knob left and right to adjust the cutting thickness
(0-18mm) required by the food.
6.Place the food to be cut on the feeding table.
7.Press the power switch to the position II (position I--continuous working-, position
II---pulse,position 0---stop). Lightly press the food by the pressing plate by hand, and push the
food-carrying feeding table to move back and forth between the knife discs until the food is