10
Detailed Settings
Open the lamp, press the MENU key to enter the setup menu. Through the upper and lower
buttons select the desired setting item, press ENTER key to enter the child; press ENTER
to save the setting is completed, press the MENU button to return to the standby screen.
Lighting should be set up when not in power has been pressing the ENTER key, opened the
display panel, the setup is complete return to the standby screen, the display panel will
be turned off automatically.
◆IP Address
Press ENTER to save press Up, Down keys to select 1 to 512, set up after: Lighting address
code. Press MENU to return to the standby screen.。
◆System settings
1：Mode
Standard mode: 28 Control channels
Reduced mode: 25 control channels
Extended mode: 38 control channels
Lighting factory default settings are: Standard mode 28 control channels
2：Back light settings
Setting the display backlight automatically or normally open, lights did not receive
the signal display will flash tips
◆System settings:
1：Lamp control Manually control lamp on/off
2：Lamp power Manually control lamp power
3：System setting Manually reset part of all function
4：Channels control Manually control fixture function
◆Automatic test
Lighting automatically run the built-in test program
◆Selections:
Summary of Contents for AL120Twins
Page 1: ...Dual Head 2R Moving Head Light AL120Twins USER MANUAL...
Page 18: ...17...
