![AOC TV3766W Service Manual Download Page 14](http://html1.mh-extra.com/html/aoc/tv3766w/tv3766w_service-manual_2949525014.webp)
37’’ LCD TV AOC TV3766W
14
2.4.4 HDMI input
HDMI is the leading new standard for Digital video and audio interconnection. To the HDMI
connector you can connect HDMI devices such as a Set Top Box or compatible DVD-R or
DVD player with HDMI export. So you can display high-definition pictures on this TV in the
digital form.
How to use HDMI
:
1. Connect the HDMI cable to the “HDMI” port of this TV, and the other port to the device’s
interface with HDMI export. (as top-left figure).
2. Select the HDMI button in the Remote control
(see bottom-left figure)
3.
The HDMI connectors allow the following TV and monitor display mod:
SDTV 720x480i 60Hz/720 x576i 50Hz
EDTV 720x480p 60Hz/ 720x576p 50Hz
HDTV 1920x1080i 50/60Hz
1280x720p 50/60Hz
VGA 640x480 60Hz
Notes:
1.Your TV supports HDCP(High-bandwidth Digital Content Protection).This Is a system for protecting DVD content.
It provides a secure digital link between a video source (DVD,PC,etc.) and your TV. Content is encrypted at the
source device to prevent unauthorized copies from being made.
2.Digital devices from different manufacturers have the possibility of differing output standards which may cause
difficulties for the television to properly display.
3.In case no signal is detected from your HDMI device, turn off the HDMI device and then on again.
4.To get an optimal viewing ,it is advised to turn your DVD player to one of the following TV display
standards:1280x720p 50hz
2.4.5 Connect the audio cable
Connect the PC audio
cable supplied with the TV to the
TV’s
PC Audio
Input as in Figure 1.
Note: If no signal is present on the VGA , the TV will enter into standby mode automatically after 1 minute.
1.
Analog (Antenna) Input:
Connect the antenna or CATV cable to this 75
Ω
coaxial cable input .
Note: When no TV signal input, TV set will enter standby status automatically within 10minutes.
2.
Audio/Video (AV) Input :
Audio 1 Input: Connect the audio signal source (PC, DVD player, Laser Disc player, videocassette recorder or
camcorder) to the Audio Input ports (left and right).
Video 1 Input: Connect the video signal source (PC, DVD player, Laser Disc player, videocassette recorder or
camcorder) to the Video 1 Input interface.
Summary of Contents for TV3766W
