AOC TV3766W, Service Manual

Page: 13 / 88

37’’ LCD TV AOC TV3766W
13
2.4 How To Connect
2.4.1 Power Connection
Plug one end of the power cord to the “AC POWER IN” jack in the rear of the TV, and the other end to the 220V
power socket.
If you have not turned off the power and leave TV in standby mode, the TV will continue to consume a residual
amount of power.
When unused for long periods of time, it is best to turn off the power switch on the side of the TV and unplug the
power cord from the socket.
2.4.2 Signal source interface presentation from rear view
:
You can connect numerous items of source equipment to your TV. The figure below shows you how to connect
these.
Place the TV on a table with the LCD screen facing down to facilitate easy connection with the external equipment.
Please take precautionary measures to avoid damaging the LCD screen.
1. VGA Signal Input : Display PC host video signal.
2. PC AUDIO Input: Receive sound signal from PC host.
(Figure 3)
2.4.3 How to connect to the PC host.
VGA interface – Connect the one terminal of VGA signal cable to the VGA interface at the rear of the TV ,The other
terminal connect to PC host.
as in Figure.
(Figure 1)
(Figure 2)