5
Connect the AC cord plug to the TV Set:
Connect the AC power cord plug to the ”AC IN” jack, Connect the other side
plug to the Wall Outlet. Press the Power switch
“
○
”
on the Plasma TV to turn
the set on.
3. Turn on the TV Set
When turn on the TV Set, the Power Indicator “ LED ” will flicker. Then
terminate to Turn on or standby state.
Power Indicator: Blue
（
Turn On
）
Power Indicator: Orange
（
standby
）
The screen below is displayed for a while after the Plasma TV is turned on. At
TV state, user can see TV program or Snowy Picture.
No TV program can see Snowy Picture or blue screen.
（
User can setup
）
If the Power Indicator is orange, user can press the “ ” key on the Front panel
controls or “POWER” key on the Remote Control Transmitter.
4. Remote Control Transmitter Setup
①
Slide off the battery cover
②
Insert batteries
Note correct polarity (+and -).
③
Replace the cover
5. Front panel controls
View from back of the TV set
• Make sure that the batteries are fitted the
correct way round.
• Do not mix different battery types,i.e.Alkaline
and Manganese or use rechargeable (Ni -
Cad)batteries.
