Wall Mounting
Preparing to Install An Optional Wall Mounting Arm.
This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this
procedure. Follow these steps:
1
Remove the base.
2
Follow the manufacturer's instructions to assemble the wall mounting arm.
3
Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the
back of the monitor.
4
Insert the 4 screws into the holes and tighten.
5
Reconnect the cables. Refer to the user's manual that came with the optional wall mounting arm for
instructions on attaching it to the wall.
Noted : VESA mounting screw holes are not available for all models, please check with the dealer or official
department of AOC.
12
Summary of Contents for I2460PXQU
Page 1: ......
Page 9: ...Setup Stand Base Please setup or remove the base following the steps as below Setup Remove 9...
Page 14: ...5 Click Display Settings 6 Set the resolution SLIDE BAR to Optimal preset resolution 14...
Page 18: ...4 Click DISPLAY 5 Set the resolution SLIDE BAR to 1920x1080 18...
