Connecting the Monitor
Cable Connections In Back of Monitor and Computer:
To protect equipment, always turn off the PC and LCD monitor before connecting.
1
Connect the power cable to the AC port on the back of the monitor.
2
Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the
computer's D-Sub port.
3
Connect one end of the DVI cable to the back of the monitor and connect the other end to the computer
‟
s DVI
port.
4
(Optional – Requires a video card with HDMI port) - Connect one end of the HDMI cable to the back of the
monitor and connect the other end to the computer’s HDMI port.
5
(Optional –Requires a video card with Audio port) - Connect one end of the Audio cable to the back of the
monitor and connect the other end to the computer’s Audio port.
6
(Optional –Requires a video card with DP port) – Connect one end of the DP cable to the back of the monitor
and connect the other end to the computer’s DP port.
7
Turn on your monitor and computer.
8
Video content supporting resolution: VGA / DVI / HDMI / DP.
If your monitor displays an image, installation is complete. If it does not display an image, please refer
Troubleshooting.
11
1
○
1
1
USB Device charging port
7
D-SUB
2
USB Device Interface
8
DVI
3
USB-PC
9
HDMI
4
Power switch
10
Audio in
5
Power
11
Earphone
6
DP
Summary of Contents for I2460PXQU
Page 1: ......
Page 9: ...Setup Stand Base Please setup or remove the base following the steps as below Setup Remove 9...
Page 14: ...5 Click Display Settings 6 Set the resolution SLIDE BAR to Optimal preset resolution 14...
Page 18: ...4 Click DISPLAY 5 Set the resolution SLIDE BAR to 1920x1080 18...
