20” LCD TV Color Monitor
AOC L20S421
16
4. Input/Output Description
4.1 D-SUB Connector
This procedure gives you instructions for installing and using the LCD TV display.
1.
Position the display on the desired operation and plug the power cord into a convenient AC outlet.
Three-wire power cord must be shielded and is provided as a safety precaution as it connects the chassis
and cabinet to the electrical conduct ground. If the AC outlet in your location does not have provisions for
the grounded type plug, the installer should attach the proper adapter to ensure a safe ground potential.
2.
Connect the 15-pin color display shielded signal cable to your signal system device and lock both screws
on the connector to ensure firm grounding. The connector information is as follow:
1
6
11
15
5
10
15 - Pin Color Display Signal Cable
Pin No.
Description
Pin No.
Description
1
Red Video
9
No Pin!
2
Green Video
10
Sync Ground
3
Blue Video
11
Not Used
4
Not Used
12
Serial Data for DDC
5 Ground 13
H-Sync.
6 Red
Ground 14
V-Sync.
7
Green Ground
15
Serial Clock for DDC
8 Blue
Ground
3. S-Video ( Y /C ):
TV rear side
: 4 pin Mini-DIN female
Component Video:
TV rear side
: RCA female ( Red / Blue / Green )
TV:
TV rear side
: IEC type female
AV : TV rear side : RCA female (Yellow )
AV/HD Audio:
TV rear side : RCA female (Red / White )
PC Input audio:
3.5mm Stereo female
Audio Input for AV,S-Video, Component Video : RCA female ( Red / White )
Headphone 3.5mm female
Audio Output ( to external speaker )
4.
Apply power to the display by turning the power switch to the "ON" position and allow about ten seconds
for Panel warm-up. The Power-On indicator lights "GREEN" when the display is on.
5. With proper signals feed to the display, a pattern or data should appear on the screen, adjust the
brightness and contrast to the most pleasing display, or press auto-adjust to get the best picture-quality.
6.
This TV (with PC function) has power saving function following the VESA DPMS. Be sure to connect the
signal cable to the PC.
7.
If your TV requires service, it must be returned with the power cord.
Summary of Contents for Envision L20S421
