AOC e2436Vwa, Service Manual

Page: 58 / 81

58
9) AC off, wait about one minute, after the elextricity large capacitance of power board release, then AC on,
otherwise, the key button and power button cann't work.
5.Check Software Version and auto color and reset:
You should check the program code is right in factory mode ;(about the method of enter factory mode ,pls reference
the service manual )
5.1Auto level :
1)Monitor display gray pattern ;
2)Enter the factory mode ;
3)Choise the AUTO LEVEL icon and run it.
4)Check the gray pattern is clear ;
5)Change to full black pattern , and check the display there is no noise .
5.2Reset
Monitor would change to default setting after reset .
5.3power off
Monitor must be turned off after rework code.