18
OSD Manual Setting
Channel Search
1
Press
MENU
to call out MENU.
2
!0! 0
}}
0! 0!
0 !
$'”
, and press
OK
.
3
!0! 0
}}
0! 0!
0 !
" ”, and then press
OK
.
Menu
Description
Country
To select the relevant country. This is the country you are in, or the country whose channels you want to receive if you
live near its borders.
Channels
Enter the channels submenu, and choose from Channel Scan, Update Scan, Single RF Scan, Analog Manual Scan,
Channel Skip, Channel Sort, Channel Edit, Decoder, and Analog CH Fine Tune.
Channel scan
Channel Scan will re-tune the television automatically. It is recommended to run the Channel Scan periodically to
ensure that all new services are added.
Update scan
Search the new channels automatically that are not in the channel list.
Single RF Scan (Digital Only)
Enter the Single RF Scan in the Channels submenu to scan digital channels.
Analog Manual Scan
The television can be tuned-in manually using Analog Manual Scan. Use the number keys to enter the Start
Frequency to scan up or scan down.
Channel skip
To prevent certain programs from being viewed by pressing CH + / - buttons on the remote control, the program
position can be skipped.
Tip: The skipped program may not be found by pressing CH + / - buttons but can be access by pressing number
buttons directly.
Channel sort
Change the order of the Channel List.
Channel Edit
Enter the Channel Edit in the channels submenu to edit the channel number and channel name by using the number
buttons 0~9.
Decoder (Analog only)
Channel Decode support the Canal+ (paid television channel); however, the channel also broadcast some un-
encrypted programs. These programs without encryption can be viewed free of charge.
Analog CH Fine Tune
Select Analog CH Fine Tune in the Channels submenu to adjust the frequency.
