16
4.3.
Cloud CMS Software introduction
1. The following figure is the main function interface of CMS software, used to match the cloud server
to achieve program playback. Please contact the dealer for cloud function, so that the software can
be used normally.
2. Figure 1 is the main interface of the software: used to play the content of the cloud editing program.
Display the main status: Current Network, Connect Status, Authorise Status etc.
3. Figure 2 shows the terminal information. Figure 1 main interface, press the remote control [
]
OPTIONS Button to pop up the this terminal information, which mainly includes the terminal name,
terminal IP, terminal MAC etc.
Button function description (from left to right):
Language: English and Chinese
Network settings: go to the network setting interface.
Terminal Configuration: used to configure cloud server information to get the program content
edited by the cloud CMS.
4. Figure 3 shows the server connection configuration interface: on the interface of Figure 2
click“Terminal Configuration” to fill in the CMS Address and Key (authentication Key), so that it can
connect to the cloud server for authentication.
Fig 1
Fig 2
Fig 3
Note:
1. Press the remote control [
] OPTIONS button to enter the Figure 2.
2. This function cannot be used together with the U Player auto play function. Because the two function
usage scenarios are different, there will be a conflict when use at the same time. It is recommended
that users do not select the U Player auto play function when using the cloud CMS application.
3. The pictures are for reference only, please refer to the actual mechine.
