Aobosi YL-20K66, Instruction Manual

Page: 43 / 44

EN
31
Troubleshooting
PROBLEM POSSIBLE CAUSE
POSSIBLE SOLUTIONS
The appliance is not work
The plug is not connected.
Connect the appliance to a mains
power socket.
ing. The On/Off indicator lamp
❸
does not light up.
The plug is damaged.
Contact the Customer Service
department.
There is no pot on the hob
❶
.
Place a suitable pot on the pot
❶
.
The appliance does not
start the cooking
The pot is not suitable for induction
hobs.
Use a suitable pot (
see
the
''Suitable cookware** section ).
process.
The child lock is ac+ived.
Press and hold the child lock
button (§)
❺
for aprox. 2 seconds.
There is no pot on the hob
❶
.
Place a suitable pot on the
EO is shown on the
display
❿
.
The pot is not suitable for induction
hobs.
hob
❶
.
E2 is shown on the
display
❿
.
The temperature sensor beneath the
hob
❶
is defective or there is a short
circuit.
Disconnect the plug from the
mains power socket and contact
the Customer Serivice
department.
E3 is shown on the
display
❿
.
The appliance is being supplied with
too much voltage ( > 270 V ).
Check and ensure that the
appliance is connected to
a
properly installed mains power
socket with
220 - 240 V 50 / 60 Hz .
E4 is shown on the
display
❿
.
The appliance is not being supplied
with enough voltage (< 150 V ).
Check and ensure that the
appliance is connected to a
properly installed mains power
socket with
220 - 240 V 50 / 60 Hz.
E5 is shown on the
display
❿
.
The appliance has overheated.
Disconnect the plug from the
mains power socket and wait until
the appliance has cooled down. If
the